25
Service Guide: Fiery Central Solo for KM
Service Procedures
To remove and replace the front panel
Note:
To remove the front panel, you must first remove the side and top panels.
1
2
From inside the chassis, bend outward on the four tabs that secure the front panel to the chassis, and then lift the
panel away from the chassis.
It may help to partially loosen the tabs one at a time as you disengage them from the chassis.
Figure 9:
Removing/replacing the front panel
3
To replace the front panel, align the openings in the panel with the DVD drive, power and reset buttons, and USB
port.
4
Press the panel against the chassis and snap it into place.
Snap the tabs into place one at a time until all four tabs have engaged the chassis.
Removing and replacing FC Solo components
Before replacing costly components, be sure to verify the connections between the copier and the FC Solo. Also, verify
the connections of each replaceable FC Solo component. For more information about troubleshooting, see
1
Front panel
2
Tab (1 of 4)
1
2