14
Service Guide: Fiery Central Solo for KM
Using the FC Solo
3
Check the Activity light on the control panel.
The power supply automatically senses the correct voltage. Allow startup to proceed without interruption.
4
At the Admin login, enter the password, and then press Enter. Wait for Command WorkStation to start and for
Fiery Central Bar to indicate that the FC Solo is Idle.
Fiery.1
. is the default password and is case-sensitive. However, the network administrator may have changed the
password.
During installation, a localhost connection to Command WorkStation is created, so when you start the FC Solo,
Command WorkStation starts also.
To shut down or reboot the FC Solo
Note:
A monitor, keyboard, and mouse are required to shut down or reboot the FC Solo. Use the reset button on the
front of the FC Solo only if the system is unresponsive to keyboard or mouse actions.
1
On the monitor, click the Windows Start button.
2
Do one of the following:
•
To shut down the FC Solo, click “Shut down.”
•
To reboot the FC Solo operating system, click the triangle next to “Shut down” and then click Restart.
To restart the FC Solo server
•
On the monitor, right-click Fiery Central Bar and click Restart Fiery Central.
