UPS: OFFICE 400 - 2000
Installation and
Connection
OFFICE Series
26
5.
Installation and Connection of the UPS
All critical values listed in the technical specifications concerning ambient and
operating conditions must be met to ensure proper operation of the UPS.
The UPS must be installed in a well-ventilated area, far from water, flammable
gases and corrosive agents.
In general, the following rules apply for the installation of the device:
–
The device may only be mounted on a solid, weight bearing and hori-
zontal surface;
–
Ensure a proper vertical installation position, as specified;
–
The UPS may only be installed in a clean, dry environment free of
dust;
–
In addition, air exchange according to EN62040-1, appendix M for
devices with accumulators must be ensured;
Fig. 5-1 Installation as standing device for the entire OFFICE series.
In addition, make sure that the ventilation channels of the UPS are not blocked
and that there is sufficient clearance between the device and other equipment,
furniture and walls to allow the device to cool. The following minimum distances
are recommended as clearance space for the OFFICE series. If there is a
forced ventilation, the clearance spaces can be reduced slightly:
Fig. 5-2 Minimum distance and maintenance space surrounding the UPS.