Efco MT 1800E, Operators Instruction Book

Page: 36 / 202

32
I
GB
F
D
E
SK
P
GR
TR
CZ
RUS
UK
PL
9. STORAGE
If the machine is to be stored for long periods:
- Make see that the elec trical plug is
disconnected from the mains.
- Follow all the maintenance regulations
described above.
- Completely empty the tank of chain
lubricant and close the cap
- Run the machine empty to completely
empty also the delivery pipe and the oil
pump.
- Clean the saw thoroughly.
- Put the blade-cover on. Store the saw in a
dry place, preferably off the ground, and
away from heat sources.
MAINTENANCE CHART
Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily work requires longer than normal
or harsh cutting conditions are present the suggested intervals should be
shortened accordingly.
Bef
o
re
Each U
se
A
ft
er Each
Refueling St
op
W
eehly
If Damaged or
Fault
y
Complete Machine Inspect (Leaks, Cracks, and Wear)
X X
Controls (on/off switch, safety
button) Check Operation
X X
Chain Brake Check Operation
X X
Check by Dealer
X
Oil Tank Inspect (Leaks, Cracks, and Wear)
X X
Chain Lubrication Check operation
X X
Saw Chain Inspect (Damage, Sharpness, and Wear)
X X
Check Tension
X X
Sharpen (Check Gauge Depth)
X
Guide Bar Inspect (Damage, and Wear)
X X
Clean Bar groove and Oil Passages
X
Rotate, Lubricate Sprocket Nose and
Deburr
X
Replace
X
Rim Sprocket Inspect (Damage, and Wear)
X
Replace
X
Chain Catcher Inspect (Damage, and Wear)
X X
Replace
X
All Accessible Screws and Nuts Inspect - Retighten
X
Motor crankcase louvers Clean
X
Power cable Inspect (Damage, and Wear)
X