Digital Video Recorder User Manual
74
8.4 Setting All-day Video Quality Diagnostics
Purpose:
The device provides two ways to diagnose the video quality: manual and all-day. Perform the following steps to set
the threshold of the diagnosing and the linkage actions.
Steps:
1.
Enter Video Quality Diagnostics settings interface of Camera Management and select a channel you want to
detect video tampering.
Menu> Camera> Video Quality Diagnostics
2.
Check the checkbox of Enable Video Quality Diagnostics.
3.
Enable and set the threshold of the diagnostic types, there are Blurred Image, Abnormal Brightness, and
Color Cast.
Check the corresponding checkbox of the diagnostic type, and adjust the threshold of it by
clicking-and-dragging the bar.
The higher the threshold you set, the harder the exception will be detected.
4.
Click
to set handling method of video quality diagnostics. Set arming schedule and alarm response
actions of the channel.
1) Click
Arming Schedule
tab to set the arming schedule of response action.
2) Choose one day of a week and up to eight time periods can be set within each day.
Time periods shall not be repeated or overlapped.
Figure 8. 9 Set Arming Schedule of Video Quality Diagnostics
3) Select
Linkage Action
tab to set alarm response actions of video quality diagnostics alarm (please refer
to
Chapter 8.6 Setting Alarm Response Actions
).
Repeat the above steps to set arming schedule of other days of a week. You can also use
Copy
button to
copy an arming schedule to other days.
4) Click the
OK
button to complete the video quality diagnostics settings of the channel.
5.
Click the
Apply
button to save and activate settings.
6.
(Optional) you can copy the same settings to other cameras by clicking the
Copy
button.
