8
GENERAL
INFORMATION
MAINTAINING EFFICIENCY
Only call the service centres authorized by manufacturer
Always use original spare parts by the manufacturer
If the supply cord is defective, it must be replaced by a special cord or assembly available from the
manufacturer or an authorized service agent.
CONTACTING QUALIFIED PERSON
/
CUSTOMER SERVICE
In the following cases:
Installat
ion (following the manufacturer’s instructions)
When in doubt about operating the appliance
The power supply cable damaged or needs to be replaced
Appliance breaks down or functions poorly
Replacing the electrical socket when it is not compatible with the appliance plug
Refer to the back cover page for the Customer Care Service contact details
INSTALLATION
The manufacturer may not be responsible for any damage due to incorrect installation and improper, incorrect
and irrational use.
BEFORE INSTALLATION
A safety distance must be left between the appliance and the kitchen walls and furniture.
Surfaces, synthetic laminates and adhesives used must be heat resistant (100°C minimum)
Kitchen cabinets must be set level and fixed.
If there is a drawer beneath the oven, a shelf must be installed between oven and drawers.
Carry the appliance with at least two persons
Take note of the following:
Prior to installation, visually check if the product has any defects on it. If so, do not have it installed.
Damaged products cause risks for your safety.
Electrical installation of this appliance must be performed only by a licensed electrician.
The oven must be installed according to the instructions supplied.
Remove the protective vinyl from the door after installation.
The power supply to the appliance must be cut off before any adjustments or maintenance work is done
on it.
Self-preparation of location and electrical installation
for the appliance is under customer’s responsibility
