9
INSTALLATION OF BUILT
-
IN OVENS
In order to ensure that the built-in appliance functions properly, the cabinet containing it must be appropriate.
The figure below gives the dimensions of the cut-out for installation under the counter or in a wall cabinet unit.
N.B: Installation in compliance with the consumption declaration.
In order to ensure adequate ventilation, the back panel of the cabinet unit must be removed. Installing the
oven so that it rests on two strips of wood is preferable. If the oven rests on a continuous, flat surface,
there must be an aperture of at least 45×560mm
The panels of the adjacent cabinets must be made of heat-resistant material. In particular, cabinets with
a veneer exterior must be assembled with glues which can withstand temperatures of up to 100°C.
In compliance with the current safety standards, contact with the electrical parts of the oven must not be
possible once it has been installed.
All parts, which ensure the safe operation of the appliance, must be removable only with the aid of a tool.
To fasten the oven to the cabinet, open the door of the oven and attach it by inserting the 4 wooden
screws into the 4 holes located on the perimeter of the frame.
Do not install the appliance next to refrigerators or
freezers. The heat emitted by the appliance will lead to
an increase energy consumption of cooling appliances.
BO AE 1370 A
BO AE 86 A
BO AE 63 A
