VS00E01KNXFI01010007.
DOC
Eelecta® Touch Panel 3,5 KNX – Product Handbook
46/156
Eelectron SpA, Via Magenta 77/22, I-20017 Rho (MI), Italia
+39 02.9316681 +39 02.93507688
[email protected] www.eelectron.com
VS00E01KNXFI01010007.doc
C.F. e P.IVA 11666760159
Capitale sociale: 250.000,00€ interamente versato
Tribunale di Milano 359157-8760-07
CCIAA Milano 148549
It is possible to determine up to 6 times for each weekday,
at which freely selectable values out of the object value
range can be sent.
5.15 1-Byte-Timer-Profile 0..255
ETS objects:
Complex element to send a 1-byte value 0...255 in a set
time allowance.
W (in Pixel) determines the width of the display's surface.
OVRTO determines the span of time, after which the
settings made manually by the user are overwritten by the
values set in the time table. (in minutes)
NOBG eliminates the button’s surface and the display is
visualized directly on the background.
STEPS determines the step width which is required to get
from the minimum to the maximum (given that MIN and
MAX are set).
MIN determines lower limit.
MAX determines upper limit.
If "Use PIN" is selected, the default master password will
be used in case PIN is not set.
Using PIN, an individual password can be assigned. In
case "Use PIN" is selected, an individual password can be
assigned using PPIN, which protects the secondary
functions of this object.
Range of values
0...255
Input
Feedback
1 Byte
Output
Switching
1 Byte
Format:
W
Determines width of button's surface
IMG
Choosing set of images
OVRTO
Determines the time (in minutes) until
manual settings are overwritten
NOBG
No button background
PF
Declaration of the unit
STEPS
Setting step width
MIN
Default setting of lower limit
MAX
Default setting of upper limit
PIN
In case "Use PIN" is selected, an
individual password can be assigned
using PIN
PPIN
In case "Use PIN" is selected, an
individual password for the secondary
function can be assigned using PPIN
