VS00E01KNXFI01010007.
DOC
Eelecta® Touch Panel 3,5 KNX – Product Handbook
99/156
Eelectron SpA, Via Magenta 77/22, I-20017 Rho (MI), Italia
+39 02.9316681 +39 02.93507688
[email protected] www.eelectron.com
VS00E01KNXFI01010007.doc
C.F. e P.IVA 11666760159
Capitale sociale: 250.000,00€ interamente versato
Tribunale di Milano 359157-8760-07
CCIAA Milano 148549
14.2. HVAC Mode-Control
ETS Objects:
Simple circuit element to send the HVAC modi and to
display the room temperature.
W (in pixels) determines the width of the button's surface.
NOBG eliminates the button‘s surface and the display is
visualized directly on the background.
The masking will be conducted as follows:
(Syntax:0=showing; 1=masking out) masking sequence:
MASK=Protection:Night:StandBy:Comfort:Automatic
In case the internal control is used and the selection for the
Touch_IT is activated, a communication via GA is
unnecessary, as soon as INTERN is set.
FAN changes the display of the control element. Use it only
in combination with INTERN. Use it to control the
ventilation.(Depends on the parameter setting of the
controller page fan)
TSET changes the display of the control element. Use it
only in combination with INTERN. Use it to raise or to lower
the comfort temperature. (Depends on the parameter
setting of the setpoint adjustment range).
If "Use PIN" is selected, the default master password will
be used in case PIN is not set. Using PIN, an individual
password can be assigned.
Range of
values
-
Input
Feedback
2 Byte
Input/Output
HVAC-Mode
1 Byte
Format:
W
Determines width of display's surface
FAN
Controlling ventilation
TSET
Shifting set point
NOBG
No button background
MASK
Masking displayed buttons
INTERN
Direct connection with internal RTR
PIN
In case "Use PIN" is selected, an
individual password can be assigned
using PIN
Examples:
HVAC-Mode-Control;INTERN
TSET;TSET;INTERN
FAN;FAN;INTERN;
