Eelectron Spa
IN00B02WEBFI00070102_ADMIN_MANUAL_EN.DOCX
28/113
The search function also supports the multiple selection of objects by holding the CTRL key of your
keyboard while selecting the desired objects with the mouse. The selected objects will all be high-
lighted.
The TOOLBAR can show the following action buttons:
EDIT
Opens the configuration window of the selected objects
DELETE
Removes the selected objects from the project
CLONE
Clones the selected objects
The CLONE-action creates a one-on-one copy of the selected objects. After the execution of this
command, the search results are refreshed and also the cloned objects will be shown (can be
recognized from the prefix “Copy of ...”).
When cloning an object, not only the objects itself is duplicated, but also all of its
connections / relations with other objects This means that the cloned object will be
contained in the same rooms, logics, scenarios etc. as also the original object.
Therefore, after the creation of a cloned object, all relations and connections should be
checked and, if necessary, corrected.
NOTE
: if the original object was present in a room with BACKGROUND view, the cloned
object will
be positioned AT THE SAME PLACE in the room and will cover the original object. In this case,
please edit the BACKGROUND view and place the cloned object in a different position.