Lexi Setup and Testing
If you did not indicate interest in Lexi at the purchase of your encoder, please contact EEG technical support at
516-293-7472 to obtain the necessary iCap and Lexi / EEG Cloud credentials. Also, be sure your HD492 is properly
setup on your network prior to setting up Lexi (instructions on Page 3).
Please note that an iCap account IS required for your HD492 to communicate with Lexi over a standard
broadband connection.
1. Confirm iCap Connectivity and Know Your iCap Access Code:
✔
From the main page of HD492 web interface, confirm the iCap Status says Connected to remote
server. If inactive, contact EEG support for credentials.
✔
Your iCap Access Code can be found in the shipping documentation provided with your Encoder. This
will be used in the next step to enable Lexi to access live program audio from, and return automatic
captions to, your encoder over iCap.
Figure 6: Active iCap Status on Encoder’s Web Interface Main Page
13
Copyright © 2021 EEG Enterprises, Inc.
All Rights Reserved.
