Edwards FireWorks FW-UL6S, Installation Manual

Page: 75 / 86

Appendix C: Applications
P/N 3102213- EN • REV 006 • ISS 18FEB19 67
Figure 47: Typical redundant serial application
(1) FW-UL6W, FW- SP4I ca rd, and FW-UL6CC1.
(2) Primary serial connection to EST3 COM port 1. Limit connection to the same room, within 20 ft. (6.1 m) for UL
or 59 ft. (18 m) for ULC, and enclose in conduit or equivalent protection against mechanical injury.
(3) Secondary serial connection to EST3 COM port 2. Limit connection to the same room, within 20 ft. (6.1 m) for
UL or 59 ft. (18 m) for ULC, and enclose in conduit or equivalent protection against mechanical injury.
Redundant Ethernet communication application
In a redundant Ethernet communication application, FireWorks uses two TCP/IP ports to connect to the fire alarm
system. If the primary port connection breaks, FireWorks can still communicate using the redundant port
c onnection. See Figure 48 .
Figure 48: Typical redundant Ethernet application
(1) FW-UL6W and FW-UL6CC1.
(2) Ethernet connection. Limit connection to the same room , within 20 ft. (6.1 m) for UL or 59 ft. (18 m) for ULC,
and enclose in conduit or equivalent protection against mechanical injury.
(3) MN- FNSx Ethernet switch.
(4) EST3/EST3X CPU and RS -232 option card.
(5) Other EST3/EST3X control panels in the same fire alarm network.
(6) Dashed line indicates the same enclosure (or equivalent).
(7) EST3/EST3X RS - 485 network.
(8) Dedicated fiber network.
(2) (3)
EST3
(1)
(4) (3)
MN-COM1S
(1)
(8)
(3)
(2)
(5)
(4) (3)
MN-COM1S
(6)
(6)
(8)
(7)
(7)