Appendix D:
Lantronix CPR Manager
74
P/N 3102213-
EN • REV 006 • ISS 18FEB19
Introduction
Lantronix CPR Manager (also known as COM Port Redirector) lets FireWorks communicate with select serial
devices using an Ethernet connection and an MN-
COM1S.
A copy of Lantronix CPR Manager is in the C:
\Fireworks\Tools\
Serial Port Tool folder after you install FireWorks.
Note:
If the host is on the other side of a router or a firewall, then you may have to add UDP ports 30718, 43282,
and 43283 to the firewall exception list. You may experience trouble in opening this COM port if these UDP ports
are not excluded. For VESDA applications, use TCP port 10001
Installing CPR Manager
1.
On the Start menu, click Comp
uter, and then open the C:\Fireworks\Tools\
Serial Port Tool folder.
2.
In the Serial Port Tool folder, double
-
click CPRSetup.exe.
3. Click Install, and then follow the on-screen instructions.
Creating the Lantronix CPR port
1.
On the Start menu, under the Lantronix folder, click CPR Manager.
Summary of Contents for FireWorks FW-UL6S
