EDWARDS SYSTEMS TECHNOLOGY IRC-3, Programming Manual

Page: 128 / 284

3.16 Programming Manual
No SAN panel in this building
Bldg. #4 - one CM2N with panel addresses 17
SAN panel address 21, no SAN-COM
Bldg. #5 - three CM2Ns with panel addresses 31, 35 and 39
SAN panel addresses 24 and 25; SAN-COM module in panel
25; system must respond to ALL SAN-COM switch
activations
CM1N
PANEL ADDRESS = 01
P5 = ZAS CARD
P6 = ZAS CARD
CM2N
PANEL ADDRESS = 05
P5 = ZAS CARD
P6 = ZAS CARD
SAN
PANEL
ADDRESS
20
SAN COM
SAN
24
PANEL
ADDRESS
SAN
21
PANEL
ADDRESS
SAN
25
SAN COM
PANEL
ADDRESS
CM2N
PANEL ADDRESS = 09
P5 = ZAS CARD
P6 = ZAS CARD
CM2N
PANEL ADDRESS = 13
P5 = ZAS CARD
P6 = ZAS CARD
CM2N
PANEL ADDRESS = 39
P5 = ZAS CARD
P6 = ZAS CARD
CM2N
PANEL ADDRESS = 35
P5 = ZAS CARD
P6 = ZAS CARD
CM2N
PANEL ADDRESS = 31
P5 = ZAS CARD
P6 = ZAS CARD
CM2N
PANEL ADDRESS = 17
P5 = ZAS CARD
P6 = ZAS CARD
RS-485
[PROG-007.CDR]
BUILDING #1 BUILDING #2 BUILDING #3
BUILDING #4 BUILDING #5
In regenerative mode, each building must operate as a stand-alone
system. This example will use the same Action 9006 that was used in
Example #1.
Action # 9006
Multi-resident panel addresses 05 09 13 17 31 35 39
Activate Action 0509 (05 use Action 9061)(09 use Action
9062)
Activate Action 1317 (13 use Action 9063)(17 use Action
9064)
Activate Action 3135 (31 use Action 9065)(35 use Action
9066)
Activate Action 3900 (39 use Action 9067)(00 entered
because of an odd # of CM2Ns)
Next, define the action that contains the polling list (family) of each
CM2N that requires interaction with the serial annunciators.
Action # 9061
Multi-resident panel addresses 05. This action must reside in the CM2N
that will communicate with the Serial Annunciator
Activate action 2002 (20 denotes the panel address of the
serial annunciator in Bldg. #2 that must communicate with
panel # 05 in regenerative mode. SAN-COM Priority 02
indicates CM2N panels in Bldg. #2 will react to only the
RESET switch activation of the SAN-COM. All other switch
firealarmresources.com