EDNord PagePro 1300W User Manual Download Page 32

Page: 32 / 82

Printing on Media

Use envelopes that are

Common office envelopes with diagonal joints, sharp folds and edges,
and ordinary gummed flaps

Approved for laser printing

Dry

In the printer driver (

Setup

tab/

Media Type

option), select

Envelope

Select the size of the envelope (

Paper

tab/

Original Document Size

option).

Place the envelopes on a flat surface, and flatten them by pressing down
the corners.

Flex the envelope stack (including the edges) to remove any stiffness.

Correct any bent corners, and tap the envelopes on a flat surface to align
them.

Squeeze the right paper guide
and open the paper guides.

Load the envelopes lengthwise and the printing-side up as shown in the
illustrations.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for PagePro 1300W



















































































Search results

Summary of Contents for PagePro 1300W

Reviews:

Related manuals for PagePro 1300W

Brands by name

Popular brands

EDNord PagePro 1300W, User Manual

Search results

Summary of Contents for PagePro 1300W

Reviews:

Related manuals for PagePro 1300W

Brands by name

Popular brands