FASTBACK 9 USER’S MANUAL, 203860 Rev . A
25
TROUBLESHOOTING - BIND QUALITY
XII
Problems
Solution
• The spine is not square.
• Fold the Lx-Strip into a 90 degree angle. The better you
fold the strip the more square the spine will be.
• After binding, make sure the book is placed in the
cooling rack to properly cool down .
Problems
Solution
• The pages protrude past the strip
• The edges of the pages are not even.
• Tap on the top and left sides of the pages until the
edges are even .
• Make sure the strip is flush against the right side of the
binding recess .
Problems
Solution
•
Bind quality is unsatisfactory.
•
Part of the page separates from the
strip .
•
Gaps in the pages where the strip can
be seen .
•
Thermal plastic adhesive leakage .
•
Verify the machine is set to the correct binding style . (See the
User Menu section for more details .)
•
Contact Powis Customer Service or Technical Support for
additional assistance .
Problems
Solution
• The pages are not adhering to the strip
very well . (Some paper stocks and some
heavy cover material can be difficult to
bind .)
• The bind may be improved by increasing the Spine Bind Time in
the Setting Menu . See the User Menu .
•
Use Lx-CP strip .
•
Contact Powis Customer Service or Technical Support for
additional assistance .
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
