FASTBACK 9 USER’S MANUAL, 203860 Rev . A
11
BINDING A DOCUMENT
WITH Lx-COMP STRIPS™
VI-B
1 . Set the binder to LX COMPOSITION mode . If the machine is in LX
COMPOSITION mode, the display will read “READY TO BIND” …
“LX COMPOSITION .”
2 . Select your Lx-Comp Strip according to your document thickness:
10-125 sheets= Narrow
125-250 sheets = Medium
(This may vary slightly depending on the paper and cover thickness .)
HINT:
If you are not sure which strip width to use, simply place
your document in the binding recess and push the BIND button . The
correct width will be shown on the display .
3. Fold the strip to a 90° angle (figure 13a). Make sure the adhesive
side faces inward .
4 . Place the strip into the binding recess with the adhesive side facing
up . The short side of the bent “L” should be resting against the back
wall. Slide the strip all the way to the right (figure 13b).
HINT:
For a uniform strip wrap width on your front cover—
regardless of document thickness—turn your document in the
binder with the front cover facing the back of the machine .
5. Tamp your document cover and pages on the front flat surface of the
housing so that they are straight . Place the document on top of the
strip and slide the document all the way to the right (figure 14).
6 . Tap the document on the top and the left to be sure all pages are
even . Push the pages backward to ensure proper binding . Check that
the document edge aligns with the edge of the strip (figure 15).
7. Press the BIND button (figure 16). The binding process will begin.
•
NOTE:
Stopping the binding process: During the first several
seconds of the binding cycle, you can push the OPEN button
(the orange button closest to the front) to abort the whole process
and open the document clamps . Use a new binding strip when the
process resumes .
8. As soon as the display flashes “REMOVE BOOK,” pick up the
document and place it against a rear book support fence (figure 17).
9. Let the bound document cool for five minutes.
F I G U R E
13a
F I G U R E
13b
F I G U R E
14
F I G U R E
15
F I G U R E
16
F I G U R E
17
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500