62
Using the audio effects
Selecting the type of effect (Algorithm)
According to the routing, select the effect type (
algorithm
). For details on the effect algorithms that are
available, refer to
fig.4-01
1.
Press
[SELECT]
. A list of effect algorithms will appear.
fig.4-02
2.
Turn the
[V1]
knob so that the desired effect algorithm
is highlighted. The effect algorithm is active from the
moment it is highlighted (i.e., you will hear the effect
immediately).
*
If you have selected a mixer routing preset (00–04) that does not use the audio effect, no effect will be
applied
(p. 52). However, the internal algorithm itself will change.
*
For some effects such as
distortion
and
lo-fi
, the output level may be high even though the source level is low.
Before you switch effects, turn down the
[VOLUME]
knob to prevent damage to your speakers, and return the level
to an appropriate setting while you monitor the effect.
3.
Listen to the sound, and if you want to edit the effect, proceed to
the basic screen, press
[SELECT]
once again.
2
1, 3
sd90_manual_e.book 62 ページ ２００４年１０月４日 月曜日 午後３時２８分
