Edirol Studio Canvas SD-90 Owner'S Manual Download Page 12

Page: 12 / 164

Introduction

■

Rear Panel

fig.1-02

USB Connector

A USB cable can be used to connect the SD-90 to your computer. In

USB mode

, audio signals and MIDI

messages can be exchanged through this cable.

MIDI Connectors

These connectors can be connected to other MIDI devices, such as a sequencer, allowing the exchange of MIDI
messages (

"Controlling the SD-90 via MIDI"

(p. 77)).

IN1/IN2

These connectors receive MIDI messages from other devices. The received MIDI messages are
sent to the computer (in USB mode) or to the internal sound generator (in MIDI mode).

OUT1/OUT2

These connectors transmit MIDI messages to other devices.

DIGITAL AUDIO Jacks

These jacks can be connected to digital audio devices such as CD players and MD players to transfer digital
audio signals.

These jacks receive digital signals from other digital devices. Use a coaxial cable with

COAXIAL

, and

an optical cable with

OPTICAL

OUT

These jacks send digital signals to other digital devices. Use a coaxial cable with

COAXIAL

, and an

optical cable with

OPTICAL

OUTPUT Jacks

These jacks output audio signals to your audio playback system or amplified speakers.

These jacks always output the signals that are being input at the input jacks. Use the front panel

VOLUME

knob to adjust the volume.

These jacks output either the signal for the rear speakers of surround reverb, or the signal from the
internal sound generator (

"Using surround output"

(p. 67)).

INPUT (LINE IN) Jacks

These jacks accept the input of analog audio signals from an audio device such as a CD player or MD player,
or from another MIDI device.

Grounding Terminal

This prevents the panel surface from developing an electrical charge.

AC IN Connector

Connect the supplied AC cord here. Never use any AC cord other than the one provided, since doing so may
cause malfunction.

sd90_manual_e.book 12 ページ２００４年１０月４日　月曜日　午後３時２８分

Summary of Contents for Studio Canvas SD-90





































































































































































Search results

Summary of Contents for Studio Canvas SD-90

Reviews:

Edirol Studio Canvas SD-90, Owner'S Manual, Page: 12 / 164

Search results

Summary of Contents for Studio Canvas SD-90

Reviews: