50
Using the Audio Mixer
Connecting a CD player
fig.3-03
1.
Turn the
GAIN
knob fully counterclockwise.
2.
Connect a CD player or other audio device to the rear panel
INPUT
jacks.
■
Digital connections
To digitally connect your CD player or digital recorder, connect it to the rear panel
OPTICAL IN
connector or
COAXIAL IN
connector, depending on the type of connector found on your device.
Selecting the digital input jack and sampling frequency
You must select either the
OPTICAL IN
jack or the
COAXIAL IN
jack. It is not possible to use both types of
jack simultaneously.
When making digital connections, you must also make sure that the sampling frequency of the connected
recorder, the sampling frequency of the SD-90, and the sampling frequency of the audio handled by the
sequencer program on your computer are all set to the same setting. Use the following procedure to select
the type of digital jack and the sampling frequency you will use.
fig.3-02b
1.
Press
[SYSTEM]
.
2.
Press
[PAGE
]
to make
Select Digital In
appear in the screen.
3.
Turn the
[V2]
knob to select the digital jack you will use, and turn the
[V3]
knob to select the sampling
frequency.
1
2
1, 5
3
4
2
sd90_manual_e.book 50 ページ ２００４年１０月４日 月曜日 午後３時２８分
