14
2-3 Connecting to Portable 3G Router by web browser
After the network connection is built, the next step you should do is
setup the router with proper network parameters, so it can work properly
in your network environment.
Before you can connect to the router and start configuration
procedures, your computer must be able to get an IP address
automatically (use dynamic IP address). If it’s set to use static IP address,
or you’re unsure, please follow the following instructions to configure
your computer to use dynamic IP address:
If the operating system of your computer is….
Windows 95/98/Me
- please go to section 2-3-1
Windows 2000
- please go to section 2-3-2
Windows XP
- please go to section 2-3-3
Windows Vista
- please go to section 2-3-4
2-3-1 Windows 95/98/Me IP address setup:
1.
Click ‘Start’ button (it should be located at lower-left corner of your
computer), then click control panel. Double-click
Network
icon, and
Network
window will appear. Select ‘TCP/IP’, then click ‘Properties’.
Summary of Contents for Wireless 3G Portable Router 3G-6210n
