background image

97 

Chapter III    Advanced Functions

 

 

3-1 Quality of Service (QoS) 
 

Quality of service provides an efficient way for computers on the network 
to share the internet bandwidth with a promised quality of internet service. 
Without QoS, all computers and devices on the network will compete 
with each other to get internet bandwidth, and some applications which 
require guaranteed bandwidth (like video streaming and network 
telephone) will be affected, therefore an unpleasing result will occur, like 
the interruption of video / audio transfer.   
 
With this function, you can limit the maximum bandwidth or give a 
guaranteed bandwidth for a specific computer, to avoid said unpleasing 
result from happening. 
 
3-1-1 Basic QoS Settings 
 
Please follow the following instructions to set QoS parameters: 
 
Please click ‘Qos’ menu on the left of web management interface and the 
following message will be displayed on your web browser: 
 
 

 

 
 
 
 


3

5 6 7 8

9

10

11

Summary of Contents for Wireless 3G Portable Router 3G-6210n






























































































































































Reviews: