background image

47 

BEZEQ network in Israel. 

 

 
Connection Type (7): Please select the connection type of Internet 

connection you wish to use, please refer to last 
section for detailed descriptions. 

 
Idle Time Out (8): 

Please input the idle time out of Internet connection 
you wish to use, and refer to last section for detailed 
descriptions. 

 
When you finish with all settings, please click ‘Next (9); if you want to 
go back to previous menu, click ‘Back’. 

 
 
2-4-6 Setup procedure for ‘L2TP xDSL’: 

 
L2TP is another popular connection method for xDSL and other Internet 
connection types, and all required setting items are the same with PPTP 
connection. 
 
Like PPTP, there are two kinds of required setting, we’ll start from ‘WAN 
Interface Settings’: 
 

 

 
Please select the type of how you obtain IP address from your service 
provider here. You can choose ‘Obtain an IP address automatically’ (equal 
to DHCP, please refer to ‘Cable Modem’ section above), or ‘Use the 
following IP address’ (equal to static IP address, please refer to ‘PPPoE 
xDSL’ section above).   
WAN interface settings must be correctly set, or the Internet connection 

Summary of Contents for Wireless 3G Portable Router 3G-6210n






























































































































































Reviews: