The following table describes the interface of the ES-5208P.
Interface/Button
Description
1~8
8 x RJ-45 Ethernet interfaces, 10 M/100 M self-adaptive.
9, 10
Two groups of fiber-copper combo ports. The copper ports are 10
M/100 M/1000 M self-adaptive Ethernet ports and the fiber ports are
SFP optical module ports. If the combo ports are preferred to serve as
fiber ports, that is, if the ports connect to a fiber port, the copper port is
disabled.
Reset
Keep the device powered on and push a paper clip into the hole. Press
down the button for about 5 seconds. The system restores the factory
default settings.
The following table describes the twenty-seven LED indicators of the PF108C.
Power: Green LED
-
Off: power off or fail
-
On: power on
10/100Mbps port LED: 2 LEDs per port, on RJ45 jack
Link/Activity: Amber LED
-
Off: port disconnected or link fail
-
On: port connected
-
Blinking: sending or receiving data
PoE status: Green LED
-
Off: PoE power off
-
On: PoE power on
10/100/1000Mbps copper port: 2 LEDs, on RJ45 jack
-
Off: port disconnected or link fail
-
Green on: 1000Mbps connected
-
Amber on: 10/100Mbps connected
-
Blinking : sending or receiving data
-
SFP: Green LED
-
Off: port disconnected or link fail
-
on: 1000FX connected
-
Blinking : sending or receiving data
Summary of Contents for GS-5208P
Page 48: ......
