background image

 

 

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you 
permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not 

accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you 

indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying 
the Program or works based on it. 

 
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a 

license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You 

may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible 
for enforcing compliance by third parties to this License. 

 

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to 
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the 
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to 

satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence 
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution 
of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy 

both it and this License would be to refrain entirely from distribution of the Program. 
 
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the 

section is intended to apply and the section as a whole is intended to apply in other circumstances. 
 
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest 

validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution 
system, which is implemented by public license practices. Many people have made generous contributions to the wide 

range of software distributed through that system in reliance on consistent application of that system; it is up to the 

author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot 
impose that choice. 

 

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 
 

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted 

interfaces, the original copyright holder who places the Program under this License may add an explicit geographical 
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus 

excluded. In such case, this License incorporates the limitation as if written in the body of this License. 

 
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to 
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems 

or concerns. 
 
Each version is given a distinguishing version number. If the Program specifies a version number of this License which 

applies to it and ‘“any later version’“, you have the option of following the terms and conditions either of that version 
or of any later version published by the Free Software Foundation. If the Program does not specify a version number of 
this License, you may choose any version ever published by the Free Software Foundation. 

 
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, 
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to 

the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of 
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software 
generally. 

 

NO WARRANTY 

 

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE 
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS 
AND/OR OTHER PARTIES PROVIDE THE PROGRAM ‘“AS IS’“ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR 

IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. 
SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR 

CORRECTION. 
 
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, 

OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO 
YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF 
THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING 

RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO 
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE 

POSSIBILITY OF SUCH DAMAGES. 
 

Summary of Contents for GS-5208P

















































Reviews: