After proper configuration, click Submit to apply the settings. Click Refresh to refresh the state of link group. When
the “--” in
Member configuration
turns into “
A
”, that indicates the trunking service has established between the
system and the corresponding end.
Field
Description
System Priority
The valid range is 1 ~ 65535.
Link Aggregation
Algorithm
You can select it from the drop-down list:
Member
The system supports three link groups.
Link Group 1: It includes the following ports: 1, 2, 3, 4.
Link Group 2: It includes the following ports: 5, 6, 7, 8.
Link Group 3: It includes the following ports: 9, 10.
State
You can select
Disable
or
Enable
.
Type
You can select it from the drop-down list:
Operation Key
When the type is LACP, there are some protocol parameters. Such
as operation key, transmitting LACP packets interactively or not.
Time Out
You can select it from the drop-down list:
It is the time out of trunking, when the link port does not receive
the corresponding LACPDU.
Activity
You can select it from the drop-down list:
One switch should be set to
Active
between two switches.
Note:
When you configure trunking service, you need to disable the Pause
and Backpressure of corresponding port in the Port Configuration page in the
Port management navigation.
Summary of Contents for GS-5208P
Page 48: ......
