These parameters are displayed:
Field
Description
Loopback Detection Function
Enables/Disables (Default: disable)
Auto Wake Up
Configures
the
interface
for
automatic loopback release.
Wake-Up Time interval
Defines the time interval for the port
that will be released from the
discarding state.
Interface status displays a list of ports with loopback detection status. Select “Reset All Ports” option for manual
release.
2.11 Trunking
This section describes how to configure static and dynamic trunks.
You can create multiple links between devices that work as one virtual aggregate link. A port trunk offers a
dramatic increase in bandwidth for network segments where bottlenecks exist, as well as providing a fault tolerant
link between two devices.
The switch supports both static trunking and dynamic Link Aggregation Control Protocol (LACP). Static trunks have
to be manually configured at both ends of the link. On the other hand, LACP configured ports can automatically
negotiate a trunked link with LACP-configured ports on another device.
Choose
Trunking
, and the
Link Aggregation Settings
sub-menu is shown as below.
Choose
Trunking
>
Link Aggregation Settings
, and the following page appears.
Summary of Contents for GS-5208P
Page 48: ......
