Edimax BR-6524n Manual Download | Manualshive

Page: 3 / 161

background image

English

Copyright

©

by Edimax Technology Co, LTD. all rights reserved. No part of

this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any
form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of this Company .

This company makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Any
software described in this manual is sold or licensed "as is". Should the
programs prove defective following their purchase, the buyer (and not this
company, its distributor, or its dealer) assumes the entire cost of all necessary
servicing, repair, and any incidental or consequential damages resulting from
any defect in the software. Further, this company reserves the right to revise
this publication and to make changes from time to time in the contents hereof
without obligation to notify any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly
different from those shown in this QIG. For more detailed information about this
product, please refer to the User Manual on the CD-ROM. The software and
specifications are subject to change without notice. Please visit our web site

www.edimax.com

for the update. All rights reserved including all brand and

product names mentioned in this manual are trademarks and/or registered
trademarks of their respective holders .

Linux Open Source Code

Certain Edimax products include software code developed by third
parties, software code is subject to the GNU General Public License
("GPL") or GNU Lesser General Public License ("LGPL"). Please see
the

GNU

(www.gnu.org) and

LPGL

(www.gnu.org) Websites to view the

terms of each license.

The GPL Code and LGPL Code used in Edimax products are distributed
without any warranty and are subject to the copyrights of their authors.
For details, see the GPL Code and LGPL Code licenses. You can
download the firmware-files at

http://www.edimax.com

under

"Download" page.

«
1
2
3
4
5
...
»

Summary of Contents for BR-6524n


































































































































































Reviews:

No comments

Related manuals for BR-6524n

Brand: H3C Pages: 34

Brand: Eaton Pages: 10

Brand: Paradyne Pages: 2

Brand: Paradyne Pages: 20

Brand: Paradyne Pages: 2

Brand: Zhone Pages: 2

COMSPHERE 6800 Series

Brand: Paradyne Pages: 155

COMSPHERE 6800 Series

Brand: Paradyne Pages: 44

Brand: Planet Pages: 20

Brand: ADTRAN Pages: 9

Brand: ForeScout Pages: 28

TRAK 2OP M11 Mill

Brand: XYZ Machine Tools Pages: 203

Brand: ZyXEL Communications Pages: 244

Brand: H3C Pages: 9

UniFi WiFi BaseStation XG

Brand: Ubiquiti Pages: 19

Emotron OSTO 100

Brand: CG Pages: 112

Brand: Hama Pages: 25

Brand: Infoblox Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands