3-2-1-5 AP Bridge-WDS
In this mode, this broadband router acts as both wireless communication bridge and
wireless access point. This broadband router can establish communication with up to four
WDS-compatible wireless access points, and let all computers connected to the LAN ports of
every wireless access points communicate with each other. The broadband router is able to
serve other wireless clients and acts as a wireless access point at the same time.
Here are descriptions of every setup items:
Item Name
Description
Band
Please select the radio band from one of
following options (must be the same with the
wireless access point you wish to connect):
2.4 GHz (B): 2.4GHz band, only allows 802.11b
wireless network client to connect this router
(maximum transfer rate 11Mbps).
2.4 GHz (N): 2.4GHz band, only allows 802.11n
wireless network client to connect this router
(maximum transfer rate 300Mbps).
2.4 GHz (B+G): 2.4GHz band, only allows
802.11b and 802.11g wireless network client
to connect this router (maximum transfer rate
11Mbps for 802.11b clients, and maximum
Summary of Contents for BR-6228nC
