Edimax BR-6228nC User Manual Download Page 3 | Manualshive

Page: 3 / 149

background image

COPYRIGHT

English

Copyright



by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be

reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of Edimax Technology Co, LTD.

Edimax Technology Co, LTD makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any
particular purpose. Any software described in this manual is sold or licensed "as is". Should the programs
prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer)
assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages
resulting from any defect in the software. Further, Edimax Technology Co, LTD reserves the right to revise
this publication and to make changes from time to time in the contents hereof without obligation to notify
any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly different from those shown in
this QIG. For more detailed information about this product, please refer to the User Manual on the CD-ROM.
The software and specifications are subject to change without notice. Please visit our web site

www.edimax.com

for the update. All rights reserved including all brand and product names mentioned in

this manual are trademarks and/or registered trademarks of their respective holders .

Linux Open Source Code

Certain Edimax products include software code developed by third parties, software code
is subject to the GNU General Public License ("GPL") or GNU Lesser General Public License
("LGPL"). Please see the

GNU

(www.gnu.org) and

LPGL

(www.gnu.org) Websites to view the

terms of each license.

The GPL Code and LGPL Code used in Edimax products are distributed without any warranty
and are subject to the copyrights of their authors. For details, see the GPL Code and LGPL
Code licenses. You can download the firmware-files at

http://www.edimax.com

under

"Download" page.

«
1
2
3
4
5
...
»

Summary of Contents for BR-6228nC






















































































































































Reviews:

No comments

Related manuals for BR-6228nC

EtherLink 3C509B

Brand: 3Com Pages: 8

Brand: LaCie Pages: 4

Brand: LaCie Pages: 4

Brand: LaCie Pages: 4

Brand: PaloAlto Networks Pages: 3

Brand: Ubiquiti Pages: 23

Brand: FOR-A Pages: 2

Brand: Oracle Pages: 112

Brand: Patton electronics Pages: 13

Brand: Angel Cool Pages: 2

Brand: Neousys Technology Pages: 39

Brand: KYLAND Technology Pages: 19

ServCon FPS-3003

Brand: LevelOne Pages: 45

Brand: Hamlet Pages: 6

CamCon FCS-4000

Brand: LevelOne Pages: 94

Brand: Emerson Pages: 4

Liebert Intellislot IS-WEBCARD

Brand: Emerson Pages: 2

Brand: Emerson Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands