2-4-3
U
PPPoE as broadband connection type
If your ISP requires you to establish Internet connection by PPPoE (Point-to-Point Protocol
over Ethernet), you can use this connection type to establish Internet connection.
Here are descriptions of every setup items:
Item Name
Description
User Name
Please input user name assigned by your
Internet service provider here.
Password
Please input the password assigned by your
Internet service provider here.
Service Name
Please give a name to this Internet service, this
is optional.
MTU
Please input the MTU value of your network
connection here. If you don
’
t know, you can
use default value.
Connection Type
Please select the connection type of Internet
connection you wish to use. There are 3
options:
‘
Continuous
’
- keep internet connection alive,
do not disconnect.
’
Connect on Demand
’
- only connects to
Internet when there
’
s a connect attempt,
Manual - only connects to Internet when
‘
Connect
’
button on this page is pressed, and
disconnects when
‘
Disconnect button is
pressed.
Summary of Contents for BR-6228nC
