Edge-Core EAP8518, User Manual, Page: 207 / 261

C
HAPTER
26
| Wireless Interface Commands
– 207 –
E
XAMPLE
AP(if-wireless 0)# rts-threshold 0
This setting has not been effective !
If want to take effect, please execute make-RF-setting-effective command !
AP(if-wireless 0)#
ssid
This command configures the service set identifier (SSID) of the VAP.
S
YNTAX
ssid < string >
string - The name of a basic service set supported by the access
point. (Range: 1 - 32 characters)
D
EFAULT
S
ETTING
vap_a0 to vap_a7 (for VAPs 0-7)
C
OMMAND
M
ODE
Interface Configuration (Wireless-VAP)
C
OMMAND
U
SAGE
Clients that want to connect to the wireless network through an access
point must set their SSIDs to the same as that of the access point.
E
XAMPLE
AP(if-wireless 0: VAP[0])# ssid net-name
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
closed-system
This command prohibits access to clients without a pre-configured SSID.
Use the no form to disable this feature.
S
YNTAX
[ no ] closed-system
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Interface Configuration (Wireless-VAP)