Edge-Core EAP8518, User Manual, Page: 140 / 261

C
HAPTER
15
| System Clock Commands
– 140 –
E
XAMPLE
AP(config)#sntp-server ip 1 10.1.0.19
AP#
R
ELATED
C
OMMANDS
sntp-server enabled
show sntp
sntp-server enabled
This command enables SNTP client requests for time synchronization with
NTP or SNTP time servers specified by the sntp-server ip command. Use
the no form to disable SNTP client requests.
S
YNTAX
[no] sntp-server enabled
D
EFAULT
S
ETTING
Enabled
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
The time acquired from time servers is used to record accurate dates and
times for log events. Without SNTP, the access point only records the time
starting from the factory default set at the last bootup (i.e., 00:14:00,
January 1, 1970).
E
XAMPLE
AP(config)#sntp-server enabled
AP(config)#
R
ELATED
C
OMMANDS
sntp-server ip
show sntp
sntp-server date-
time
This command sets the system clock.
S
YNTAX
sntp-server < year > < month > < day > < hour > < minute >
year - Sets the year. (Range: 1970-2100)
month - Sets the month. (Range: 1-12)
day - Sets the day. (Range: 1-31)
hour - Sets the hour. (Range: 0-23)