Edge-Core EAP8518, User Manual, Page: 183 / 261

C
HAPTER
23
| Spanning Tree Commands
– 183 –
E
XAMPLE
AP(config)#bridge stp max-age 40
AP(config)#
bridge stp br-conf
priority
Use this command to configure the spanning tree priority globally for the
wireless bridge.
S
YNTAX
bridge stp br-conf priority < priority>
priority - Priority of the bridge. (Range: 0 - 65535)
D
EFAULT
S
ETTING
32768
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
Bridge priority is used in selecting the root device, root port, and
designated port. The device with the highest priority becomes the STP root
device. However, if all devices have the same priority, the device with the
lowest MAC address will then become the root device.
E
XAMPLE
AP(config)#bridge stp br-conf priority 40000
AP(config)#
bridge stp port-conf
interface
This command enters STP interface configuration mode.
S
YNTAX
bridge stp port-conf interface { ethernet | wireless <index>}
index - The wireless interface index number. (Only “0” for this AP.)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
Use this command to enter STP interface configuration mode. In this mode
STP settings for specific VAP interfaces can be configured.