Edge-Core EAP8518, User Manual, Page: 119 / 261

C
HAPTER
12
| General Commands
– 119 –
reset
This command restarts the system or restores the factory default settings.
S
YNTAX
reset < board | configuration >
board - Reboots the system.
configuration - Resets the configuration settings to the factory
defaults, and then reboots the system.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Exec
C
OMMAND
U
SAGE
When the system is restarted, it will always run the Power-On Self-Test.
E
XAMPLE
This example shows how to reset the system:
AP#reset board
Please wait a moment...
show line
This command displays the console port’s configuration settings.
C
OMMAND
M
ODE
Exec
E
XAMPLE
The console port settings are fixed at the values shown below.
AP#show line
Console Line Information
======================================================
databits : 8
parity : none
speed : 115200
stop bits : 1
======================================================
AP#