2
edenox.com
ENGLISH
The manufacturer shall not be held
liable for any damage attributable to the failure to follow
the instructions contained in this manual, hence it is recommended that you carefully read all
information herein.
Keep the manual for later use.
Warning!!!
Do not use the device if it is faulty.
1.3 TECHNICAL PARAMETERS
MODEL
EXTERNAL
DIMENSIONS (mm)
CAPACITY
GN
*CUTOUT
DIMENSIONS
(mm)
VOLTAGE
(V/Hz)
POWER
(W)
WEIGHT
(kg)
length
width
high
length width
DBM
-
211
-M-W
790
610
304
2 x GN1/1
770
585
230/50
1600
DBM
-
311
-M-W
1115
610
304
3 x GN1/1
1095
585
230/50
2400
DBM
-
411
-M-W
1440
610
304
4 x GN1/1
1420
585
230/50
3200
33
2.
INSTALLATION
2.1 General information.
2.2 Transport, lifting, unpacking, storage.
2.3 Intended use and limitations.
2.4 Layout and description of the manufacturer’s rating label.
2.5 Installation and assembly.
2.6 Connections (electricity, gas, and water).
2.1 GENERAL INFORMATION.
The water bain
-
marie should be unpacked, installed and tested by qualified service personnel.
After being brought into the room where it is going to be installed, the device should be left for
approximately 6 hours so that it can achieve the ambient temperature. Then it can be connected to
power supply.
