If this product is used in combination with other components of
a rescue/fall arrest system, users must acquaint themselves and
comply with the enclosed documentation, notes and instructions
for these components prior to use. This equipment should only
be used in connection with parts of Personal Protective
Equipment (PPE) bearing the CE-symbol to protect individuals
against falls from heights.
If original components are modified or removed from the
product, its function maybe impaired. The equipment should not
be modified or altered in any way to allow the attachment of
additional parts without the manufacturer’s written
recommendation.
The equipment must be checked for possible damage before and
after each use. It must be ensured that the equipment is
serviceable and fully functional. The equipment must be
discarded immediately if there is even the slightest doubt
regarding the safety of the product.
WArNiNg!
The products must be kept away from harmful
environments. This includes contact with corrosive and
aggressive substances (e.g. acids, alkalis, soldering water, oils,
cleaning agents), as well as extreme temperatures and flying
sparks.
In addition, sharp edges, wetness and icing can diminish the
stability of textiles!
climAtE rEQuirEmENtS
The safe constant temperature range for the product (in dry
conditions) ranges from approx. -20°C to +55°C.
lifESPAN ANd rEPlAcEmENt
The lifespan of the product depends mainly on the frequency and
the way in which it is used and external influences.
Products made from synthetic fibres (Polyamide, Polyester,
Dyneema
®
, Aramid) are subject to certain ageing processes even
if they are not used. These are caused by the intensity of UV-rays
and environmental influences.
Maximum lifespan under optimal storage conditions (see section
on storage) and without use: 12 years
occASioNAl uSE
Occasional and appropriate use without obvious wear and tear
and with optimal storage: 8 years. Commercial use can reduce
the life span to less than 2 years.
frEQuENt or ExtrEmE uSE, cAtch loAd
Following a fall load (fall factor > 1) or in the event of damage,
the Personal Protection Equipment product should be withdrawn
from use immediately and returned to an expert or the
manufacturer for detailed inspection and possible repair. An
account of the fall or events leading to the damage should be
included.
As a general rule, PPE products must be replaced immediately,
for example, if webbing products have frayed edges or fibres are
torn out of the weave, if stitching shows signs of damage and/
or abrasion or if the product has been in contact with chemicals.
Repairs may only be carried out by the manufacturer or in
accordance with procedures recommended by the manufacturer.
iNSPEctioN
The product must be regularly inspected and maintained on a
yearly basis or earlier if necessary, by the manufacturer or an
authorised testing centre.
In the process, it must be ensured among other things that the
product labelling is legible.
Once the above-mentioned 8 years period of use has been
exceeded, the personal protection equipment product must be
withdrawn from further use. Commercial use can reduce the life
span to less than 2 years.
StorAgE, trANSPort ANd cArE
StorAgE:
Store in a cool, dry, dark place and not in the transport
packaging.
Avoid contact with chemicals (caution: battery acid!). Store
without mechanical stress by pinching, pressure or tension.
trANSPort:
The product must be kept away from direct sunlight, chemicals,
dirt and mechanical damage. For storage purposes, a protective
GAL Smart Belay 131120.indd 15
19.02.2014 10:42:43
Summary of Contents for Smart Belay
Page 1: ...EN 354 EN 355 EN 566 EN 362 2008 EN 12278 GAL Smart Belay 131120 indd 1 19 02 2014 10 42 39 ...
Page 7: ...8 7 6 5 9 4 GAL Smart Belay 131120 indd 7 19 02 2014 10 42 41 ...
Page 8: ...15 14 13 12 11 10 GAL Smart Belay 131120 indd 8 19 02 2014 10 42 42 ...
Page 9: ...18 17 16c 16b 16a GAL Smart Belay 131120 indd 9 19 02 2014 10 42 43 ...
