TriTrax™ 200 Vertical Crawler
Document: UMDT017749.docm
Revision: A02
Created by: JS
Date: 13 Apr 2021
IPN: 3094329-A02
Source Location: C:\ePDM\ISLEng\Products\DT-VersaTrax100MkII\Manuals\UMDT017749.docm
Page 32 of 36
User Ma
nual
Rinsing and Cleaning
After every mission check to see if the vehicle needs cleaning.
1. If the system has been used in saltwater, thoroughly rinse the vehicle with fresh water prior to being
stored away. Accelerated corrosion will result if the inspection system is not rinsed properly. Pay
close attention to rinsing and cleaning the camera window, LED light dome and the spaces between
moving parts and track belts.
2. Use an open hose or tap at regular water line pressure for rinsing. Do not pressure wash the
equipment
– water will be forced into the camera at these high pressures.
3. Avoid scratching the camera port. Use glass cleaner and a soft cloth to clean the port.
CAUTION:
Do not use a pressure washer to clean the camera. Very high-pres-
sure water can push past seals and flood the components resulting in electrical
damage or personal injuries.
Periodically:
1. Use a damp cloth or spray cleaner for the power supply / controller box. The box must never be
sprayed down or immersed in water. Unplug the controller before cleaning.
2. For general cleaning of the cameras and tracks, use a mild detergent.
Note that the expansion screws employ plastic ACME nuts for lubricant-free operation and do not require
greasing.
Microtrac™ Maintenance
Refer to the Microtrac manual for maintenance and servicing instructions.
Camera Maintenance
Refer to the Spectrum
™
45 manual for camera maintenance and servicing instructions.
Tether Re-termination
Contact us if tether re-termination is required. Tether re-termination kits are also available. Detailed
instructions and wiring diagrams will be included with the kit.
