TriTrax™ 200 Vertical Crawler
Document: UMDT017749.docm
Revision: A02
Created by: JS
Date: 13 Apr 2021
IPN: 3094329-A02
Source Location: C:\ePDM\ISLEng\Products\DT-VersaTrax100MkII\Manuals\UMDT017749.docm
Page 8 of 36
User Ma
nual
Misuse of the system is deployment in a situation for which it is not rated, or incorrect handling.
Examples of misuse include:
•
In a vacuum
•
Beyond its depth rating without factory approval
•
Above or below its temperature rating
•
Use in a potentially explosive atmosphere
•
Use in incompatible chemical environments
•
Very high radiation environments (Beta / Gamma)
•
Prolonged overload (Payload or pulling load)
•
Camera pointed at the Sun or at intense lighting
System Setup
Personnel Requirements
Basic deployment of the
TriTrax™ 200 system may be performed by one person. Operations at more
complex worksites may require two people, especially when the console location is removed from the point
of deployment.
•
Console Operator:
This person is responsible for driving the vehicle, watching the pipe and
making comments about the location and pipe condition. It is also the operator’s responsibility to
assess whether a pipe is in the appropriate condition for safe passage of the vehicle or if there is a
risk of getting stuck. The operator may also assist in general site setup (cones, warning signs, etc.),
vehicle maintenance and configuration.
•
Deployment / Tether Handler / Field Maintenance:
This person has several tasks including:
o
Configuring the vehicle for the current pipe
o
Lowering the vehicle in and out of the manhole
o
Watching the tether as the vehicle enters and exits the pipe
o
Operating the reel and winding the tether during recovery
Establish a good channel of communication between the operator and deployment personnel. Good
communication can avoid accidents, damage to the equipment, and promotes efficiency and productivity.
In particular, the person deploying the vehicle and watching the tether must be able to quickly tell the
operator to stop the vehicle if something goes wrong. The operator should never turn on power or initiate
movement without first communicating with the vehicle handler.
Working and Storage Environment
The control system (IC™ 450 Portable Controller or Interface Box and Control computer) is to be used in a
dry, covered
environment only. These components are not waterproof. Keep all cords and cables away
from water.
