Versatrax 50™ In-Line
Document: UMBU014988.docm
Revision: A04
Created by: KJW
Date: 20 Nov 2019
IPN: 3080215-A04
Source Location: C:\ePDM\ISLEng\products\bu-vt50vehicles\manuals\UMBU014988.docm
Page 10 of 25
User Ma
nual
4.
Disengage
the shipping brake.
5. Make sure the friction brake is
engaged
– disengaging the friction brake can result in slack tether
resulting in potentially jamming the reel.
6. Unwind some tether and connect the tether to the vehicle.
Vehicle Configuration
General Vehicle Assembly: One, Two or Three Tracks
The Versatrax 50
™ ships disassembled for portability. Its modular design can easily be configured to
operate with
one
,
two
or
three
tracks, or in a camera only drop configuration.
To assemble the basic vehicle with one, two or three tracks, and with reference to the illustration below;
1. Remove tracks, camera and push links from their respective shipping containers.
2. Lay out the components on the bench in order.
3. Attach the tow cable to the rear track:
a. Remove the retainer clip located underneath the connector.
b. Insert the tow cable anchor into the housing.
c. Fasten retainer back on.
