Versatrax 50™ In-Line
Document: UMBU014988.docm
Revision: A04
Created by: KJW
Date: 20 Nov 2019
IPN: 3080215-A04
Source Location: C:\ePDM\ISLEng\products\bu-vt50vehicles\manuals\UMBU014988.docm
Page 5 of 25
User Ma
nual
Intended Use
The VT50
™ is an industrial inspection vehicle intended for pipe inspections to provide close-up video of
the inspection target. VT50 may be used above or below the waterline up to 60m deep, or in dry
environments. VT50 has been designed to support a modular approach by allowing the operator to
configure the vehicle in one, two and three track configurations. The VT50 system can also be configured
as a Spectrum 45™ or Onyx™ Drop Camera.
Typical applications include:
•
Sewer and storm drains
•
Air ducts
•
Steam headers
•
Tanks and pressure vessels
•
Pulp and paper mills
•
Oil & gas refineries and pipelines
Misuse of the system is deployment in a situation for which it is not rated, or incorrect handling.
a. In a vacuum
b. Beyond its depth rating without factory approval
c. Above or below its temperature rating
d. Use in a potentially explosive atmosphere
e. Use in incompatible chemical environments
f.
Very high radiation environments (Beta/Gamma)
g. Prolonged overload (payload or pulling load)
h. Camera pointed at the Sun or at intense lighting
i.
Mechanical impacts & scraping during deployment / dropping
