Versatrax 50™ In-Line
Document: UMBU014988.docm
Revision: A04
Created by: KJW
Date: 20 Nov 2019
IPN: 3080215-A04
Source Location: C:\ePDM\ISLEng\products\bu-vt50vehicles\manuals\UMBU014988.docm
Page 4 of 25
User Ma
nual
About This Manual
This manual has been prepared to assist you in the operation and maintenance of your Eddyfi
Technologies
’ Inuktun equipment. Correct and prudent operation rests with the operator who must
thoroughly understand the operation, maintenance, service and job requirements. The specifications and
information in this manual are current at the time of printing.
This product is continually being updated and improved. Therefore, this manual is meant to explain and
define the functionality of the product. Furthermore, schematics or pictorials and detailed functionality may
differ slightly from what is described in this manual.
Eddyfi Technologies reserves the right to change and/or amend these specifications at any time without
notice. Customers will be notified of any changes to their equipment.
Information in this manual does not necessarily replace specific regulations, codes, standards, or
requirements of others such as government regulations.
This manual copyright © 2019 by Eddyfi Robotics Inc. All rights reserved.
Description of Equipment
The Inuktun
Versatrax 50™ In-Line (VT50) is a portable pipe inspection system which utilizes one to three
Picotracs™ in an inline configuration with integrated traction control arms to fit in a 50-100mm (2-4 inch)
pipe range. The vehicle
comes standard with an Inuktun Onyx™ camera and will support an optional
Inuktun
Spectrum 45™ pan-and-tilt camera with on-board LEDs to facilitate visual inspections in 78-102mm
(3-4 inch) pipe sizes. The vehicle can be configured to use one, two or three Picotracs, depending on
distance.
All Versatrax™ hardware can be used underwater and in dirty, muddy conditions. The rugged
design ensures a long service life and helps protect the vehicle from damage during normal use.
