W 2 0 1 2 P
4.5
VEHICLE FAST CONNECTING TO CMS
Step 1:
Install SIM card which support WCDMA/EVDO. Please refer to Section 2.6 for detailed
installation steps reference, as shown in Figure 2-15.
Step 2:
Enter into system menu after booting, modify the host s device number from 00000 to 99999
firstly, SYSTEM MENU - SETUP-BASIC- SETUP VEHICLE NUM. Each server identifies different
hosts by their device number, which is crucial to be modified. If the host still can not connect to CMS
after modification, please check whether the device number is workable or not .
Step 3:
Modify the vichile s number, by which vehicles information is displayed in CMS platform.
If the default number 00000 is not changed, vehicles searching will be quite inconvenient because of
different vechile s and numbers.
Step 4:
Enter into important network setup, SYSTEM MENU - SYSTEM SETUP-NETWORK SETUP,
and setthe server IP and port. The server can be built by the user or connect to manufacturer s
server, takethe server
IP: 113.108.110.117
as an example, input the server IP, then input the control
port number 8501, and save, as shown in Figure 3-10.
'
'
'
'
NOTE: For the Simply MDVR which without WIFI and 3G modules, the below instructions is not
compatible to them
Insert USIM card
modify the
DEV number
modify the
Vehicle number
set the server IP address
and port
3G setup
WIFI setup
F1
INFO
for user names allocation
and vehicles adding
CMS Client
for viewing
Figure 4-9
Process of the
vehicle
s fast connecting to cms
THE MAIN FLOW OF RAPID REPORT TO CMS IS SHOWN IN THE BELOW FIGURE 4-9.
Step 5:
Enter into SYSTEM MANU- MODULE , which includes 3G and WIFI setup. There are
two steps as belowing :
A.Wireless setup
For wireless 3G setup, its cluding WCDMA and EVDO network type. Also need to notice APN and
center number. User name is defaulted Local lace, some overseas network operator need to enter
user name and password, the APN and the center number also need to be modified based on the
local network data then input relevant information. After setup is complete you can press the INFO
button to check whether dial query is success or not
"
"
B. WIFI SETUP
Regarding to WIFI setup, please note the belowing several points, mainly are the authentication
mode and encryption type. Authentication mode is not in effect currently only choice is OPEN
"
''
WIRELESS:
TYPE:
APN:
CENTER NUM:
USER NAME:
PASSWORD:
WIRELESS:
TYPE:
APN:
CENTER NUM:
USER NAME:
PASSWORD:
26
SD Card Mobile DVR User Manual
26
