SE-3&SE-300 Series Electrocardiograph User Manual Introduction
- 15 -
11)
Left Arrow/ Right Arrow Key
(SE-3)
(SE-300 series)
Press the Left or Right arrow to set the selected item.
2.3 Patient Cable Socket and Signal Interface
As shown in Figure 2-1 and Figure 2-5, on the right side of the main unit are the patient cable
socket, the RS232 socket, the external input/output socket and the USB interface.
Figure 2-5 SE-300 series
The net port (optional, only for Net type) is on the back of the main unit shown in the following
figure. Only the electrocardiograph with net port can support network transmission function.
Figure 2-6 SE-3
WARNING
1. Only the USB equipment recommended by the manufacturer can be connected to the
USB interface.
2. The summation of leakage current should never exceed the leakage current limit
while several other units are used at the same time.
Net Port
Patient Cable Socket
RS232 Socket
External Input/Output Socket
USB Interface
