manualshive.com logo in svg

EDAN CADENCE II, User Manual, Page: 16 / 78

Share
Download
EDAN CADENCE II User Manual Download Page 16

CADENCE II Fetal Monitor User Manual 

- 10 - 

Chapter 3 Introduction 

3.1 Functions 

The CADENCE II Fetal Monitor can provide different configurations according to different user 

requirements: FHR1 (Fetal Heart Rate 1), FHR2 (Fetal Heart Rate 2), TOCO, AFM (automatic 

fetal movement monitoring), MFM (manual fetal movement monitoring), FS (fetal stimulator, 

optional), DECG (direct fetal ECG, optional) and IUP (Intra-uterine Pressure, optional).   

A 5.7” LCD display is applied by the monitor to display the FHR1, FHR2/DECG (dual 

configuration) and TOCO/IUP trend and numerics. Also a built-in thermal recorder is used to 

print the trends and other information. A rechargeable lithium-ion battery is provided for your 

option. 

A DB9 interface is built in the monitor. With it, the monitor can be connected to a computer or 

the MFM-CNS central monitoring system via 485 network. Optionally, you can order a built-in 

wireless network module to connect the monitor via wireless network. The data collected and 

stored by CADENCE II can be analyzed by the Insight software running on PC or MFM-CNS 

(Refer to 

MFM-CNS Central Monitoring System User Manual

 and the relevant information of 

wireless network module).   

 

Summary of Contents for CADENCE II















































































Reviews:

No comments