EDAC 222-02 AUTO ALARM DIALLER
- 18 -
Entering Programming Mode
To enter programming mode enter the PIN number.
The factory default PIN is
1234
The character display will now show the
prompt.
What to do if you Forget your PIN Number
If your PIN is not working, remove the power from the EDAC 222-02. Reapply the power while
holding down any key. The product will go into programming mode and display the
prompt.
To choose a new PIN number use function
F00
Modify PIN Number
.
Exit to RUN Mode
Once all the functions have been programmed, exit programming mode by pressing
##
very
quickly at the
prompt. Pressing too slowly causes the display to cycle through the product
software version number before returning to the
prompt (still in programming mode). The EDAC
222-02 should now display the
with a flashing dot. In RUN mode the EDAC 222-02 is ready to
accept an Input trigger and make alarm notification calls.
##
= Exit programming to RUN mode.
