ECS RS485M-M, Manual, Page: 51 / 88

45
Using BIOS
FAN1 Slope PWM value (0)
Press Ctrl + F1 to show this item. This item specifies the slope PWM value of smart fan.
Press <Esc> to return to the PC Health Status screen.
Shutdown Temperature (Disabled)
This item enables or disables you to set the maximum temperature the system can reach
before powering down.
Warning Temperature (Disabled)
This item allows users to manually set the warning temperature of the system.
System Component Characteristics
These fields provide you with information about the systems current operating status. You cannot
make changes to these fields.
• CPU Vcore
• VDIMM
• +3.3V
• +5V
• +12V
• VBAT
• CPU Tcontrol
• System Temperature
• CPU Fan Speed
• System Fan Speed
Phoenix-AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
AMD K8 Cool ‘n’ Quiet control [Auto]
Auto Detect PCI Clk
[Enabled]
Spread Spectrum [Disabled]
CPU Clock [200 MHz]
Frequency/Voltage Control
This item enables you to set the clock speed and system bus for your system. The clock
speed and system bus are determined by the kind of processor you have installed in your
system.
Item Help
Menu Level
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
This item helps the system to lower the frequency when CPU idles. When the frequency
decreases, the temperature will drop automatically as well.
AMD K8 Cool ’n’ Quiet control (Auto)
Auto Detect PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free PCI slots.
Spread Spectrum (Disabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
CPU Clock (200 MHz)
This item allows users to manually adjust the CPU clock.