ECS RS485M-M, Manual, Page: 30 / 88

24
Installing the Motherboard
AUXIN1: Auxliary In connector (Optional)
Pin Signal Name Function
1
AUX_R
AUX In right channel
2
RET_R
Return Right Aux in
3
RET_L
Return Left Aux in
4
AUX_L
AUX In left channel
WOL1: Wake On LAN Connector (Optional)
If you haveinstalled a LAN card, use the cable provided with the card to plug into the
motherboard WOL connector. This enables the Wake On LAN (WOL) feature. When your
system id in a power-saving mode, any LAN signal automatically resumes the system. You
must enable this item using the Power Management page of the Setup Utility.
1
5VSB +5V stand by power
2
GND Ground
3
Ring# Wake up signal
Pin Signal Name
Function
1394A2: Onboard IEEE 1394a header (optional)
Connect this header to any device with IEEE 1394a interface.
Pin Signal Name Function
1
TPA+
2
TPA-
3
GND
4
GND
5
TPB+
6
TPB-
7
Cable-Power
8
Cable-Power
Pin Signal Name
Pin Signal Name
9
Key Pin
10
GND