ECS RS485M-M, Manual

Page: 45 / 88

39
Using BIOS
Onboard Azalia AUDIO [Auto]
Onboard 1394 [Enabled]
Onboard PCI Lan [Enabled]
Onboard Lan Boot ROM [Disabled]
Onboard SATA Controller [Both]
Onboard SATA Type [IDE Mode]
USB 2.0 Supports [Enabled]
USB Controller [Enabled]
USB Legacy Support [Enabled]
USB Mouse Support [Enabled]
South OnChip PCI Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Item Help
Menu Level
Phoenix-AwardBIOS CMOS Setup Utility
South OnChip PCI Device
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Onboard Azalia AUDIO (Auto)
This option allows you to control the onboard Azalia audio. Disable this item if you are
going to install a PCI audio add-on card.
Onboard 1394 (Enabled)
This option allows you to enable or disable the onboard 1394 function.
Onboard PCI Lan (Enabled)
This option allows you to control the onboard LAN device.
Onboard LAN Boot ROM (Disabled)
Use this item to enable and disable the booting from the onboard LAN or a network add-
in card with a remote boot ROM installed.
Onboard SATA Controller (Both)
This item allows you to control Serial ATA controller.
Onboard SATA Type (IDE Mode)
This item allows you to manually specify the onboard Serial ATA Type.
USB 2.0 Supports (Enabled)
Enable this item if your system supports USB 2.0.
USB Controller (Enabled)
This item enables the USB controller. Leave this at the default “Enabled” if you want to
connect USB devices to your computer.
USB Legacy Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto allows
the system to detect the presence of USB devices at startup. If detected, the USB
controller legacy mode is enabled. If no USB device is detected, the legacy USB support
is disabled.
USB Mouse Support (Enabled)
Enable this item if you plan to use a mouse connected through the USB port in a legacy
operating system (such as DOS) that does not support Plug and Play.
Press <Esc> to return to the Advanced Chipset Features page.