ECS RS485M-M, Manual

Page: 48 / 88

42
Using BIOS
Resume Event Control (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phoenix-AwardBIOS CMOS Setup Utility
Resume Event Control
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Resume by Ring (Disabled)
This item specifies whether the system will be awakened from power saving modes when
activity or input signal of Ring device is detected.
Resume by PCI-E (Enabled)
This item specifies whether the system will be awakened from power saving modes when
inserting PCI-Express card.
Press <Esc> to return to the Power Management Setup screen.
Item Help
Menu Level
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Resume By Ring [Disabled]
Resume By PCI PME [Enabled]
Resume By PCI-E [Enabled]
Resume By USB (S3) [Disabled]
Resume By PS/2 Mouse [Disabled]
Resume By PS/2 Keyboard [Disabled]
Hot Key Resume [Ctrl-F1]
RTC Alarm Resume [Disabled]
Date (of Month) Alarm 0
Time (hh:mm:ss) Alarm 0 0 0
x
x
x
Resume by PCI PME (Enabled)
This item specifies whether the system will be awakened from power saving modes when
activity or input signal of the specified hardware peripheral or component is detected.
Resume by USB (S3) (Disabled)
This option allows the activity of the USB devices to wake up the system from S3 sleep
state.
Resume by Mouse (Disabled)
This option allows the activity of the mouse device to wake up the system from sleeping
status.
Resume by Keyboard (Disabled)
This option allows the activity of the keyboard device to wake up the system from
sleeping status.
• Hot Key Resume (Ctrl-F1): Use this item to define the password when
using the keyboard “hot key” to resume the system.
RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can set the date (day of
the month), hour, minute and second to turn on your system. When set to 0 (zero) for
the day of the month, the alarm will power on your system every day at the specified
time.
• Date of Month : Use this item to define the date of month when using the RTC
alarm to resume the system.
• Resume Time : Use this item to define the time when using the RTC alarm to
resume the system.